The third generation high efficiency permanent magnet motor
- L insulation grade F, protection grade IP54,adapt to the bad environment.
- Split design, easy maintenance.
- Without gearbox design, motor is connected directly with rotor through the coupling, high transmission efficiency.
- Low temperature rise, independent cooling fan design, so that the motor cooling is not affected by the speed regulation.
- With PT100 temperature protection switch to avoid high temperature degaussing.
- Large speed range, high precision and large adjustment range.
- high temperature magnetic steel UH, 180 ℃ not break the magnetic.
- permanent magnet motor is 3%~5% higher than normal motor, and constant efficiency.
The third generation dual variable frequency inverter
- Dual variable frequency system: permanent magnet motor variable frequency + cooling fan motor variable frequency , one-piece integrated structure, extreme energy saving.
- Constant pressure air supply: the supply pressure is precisely controlled under 0.01 MPa.
- Constant temperature air supply: constant temperature set at 85 ℃, with the best lubrication
- Eliminates empty load, reduces the empty load energy consumption by 45%.
- Eliminate overpressure
- Large Frequency range 30%~ 100%
- Vector air supply, accurate calculation, ensure that the air flow of air compressor is consistent with the demand of the user system.
Intelligent control system
- Direct display: discharge temperature, discharge pressure, operating frequency, current, power, running state, etc.
- Real-time monitoring of discharge temperature, discharge pressure, current, frequency fluctuation.
- Optional the Internet of things module, external cloud intelligent management system, realize the functions such as remote start-stop and remote online monitoring
Energy Saving Value Delivery
Spesification
| Type | Power (KW/HP) | Pressure (MPa) | Free Air Delivery (m2/min) | Weight (kg) | Dimension (mm) | Air Supply (Inch) |
| MP11A | 11/15 | 0.7 | 0.53-1.9 | 360 | 1200×750×10800 | 1” |
| MP11B | 1 | 0.48-1.6 | ||||
| MP11D | 0.8 | 0.52-1.8 | ||||
| MP15A | 15/20 | 0.7 | 0.73-2.6 | 380 | 1200×750×1080 | 1” |
| MP15B | 1 | 0.63-2.15 | ||||
| MP15D | 0.8 | 0.72-2.41 | ||||
| MP18.5A | 18.5/25 | 0.7 | 0.89-3.2 | 430 | 1460×860×1300 | 1-1/4” |
| MP18.5B | 1 | 0.78-2.6 | ||||
| MP18.5D | 0.8 | 0.88-2.95 | ||||
| MP22A | 22/30 | 0.7 | 1.03-3.7 | 450 | 1460×860×1300 | 1-1/4” |
| MP22B | 1 | 0.93-3.1 | ||||
| MP22D | 0.8 | 1.02-3.5 | ||||
| MP30A | 30/40 | 0.7 | 1.38-5.2 | 480 | 1460×860×1300 | 1-1/2” |
| MP30B | 1 | 1.23-4.3 | ||||
| MP30D | 0.8 | 1.35-4.9 | ||||
| MP37A | 37/50 | 0.7 | 1.86-6.7 | 930 | 1730×910×1680 | 1-1/2” |
| MP37B | 1 | 1.71-5.7 | ||||
| MP37D | 0.8 | 1.83-6.3 | ||||
| MP45A | 45/60 | 0.7 | 2.16-7.8 | 950 | 1730×910×1680 | 1-1/2” |
| MP45B | 1 | 1.95-6.8 | ||||
| MP45D | 0.8 | 2.13-7.5 | ||||
| MP55A | 55/73 | 0.7 | 3.0-10.5 | 1900 | 2000×1200×1800 | 2″ |
| MP55B | 1 | 2.52-8.4 | ||||
| MP55D | 0.8 | 2.82-9.8 | ||||
| MP75A | 75/100 | 0.7 | 4.26-13.5 | 2000 | 2000×1200×1800 | 2″ |
| MP75B | 1 | 3.64-11.5 | ||||
| MP75D | 0.8 | 4.02-12.4 | ||||
| MP90A | 90/120 | 0.7 | 4.95-16.5 | 2200 | 2500×1400×1930 | 2-1/2″ |
| MP90B | 1 | 4.11-13,7 | ||||
| MP90D | 0.8 | 4.86-16.2 | ||||
| MP110A | 110/147 | 0.7 | 6.0-20.0 | 2500 | 2500×1400×1930 | 2-1/2″ |
| MP110B | 1 | 5.1-17.0 | ||||
| MP110D | 0.8 | 5.88-19.6 | ||||
| MP132A | 132/176 | 0.7 | 7.05-23.5 | 2600 | 2500×1400×1930 | 2-1/2″ |
| MP132B | 1 | 6.15-20.5 | ||||
| MP132D | 0.8 | 6.75-22.5 | ||||
| MP160A | 160/215 | 0.7 | 8.55-28.5 | 2600 | 2500×1400×1930 | 2-1/2″ |
| MP160B | 1 | 7.35-24.5 | ||||
| MP160D | 0.8 | 8.1-27.0 |